Blog Kitchen UK

As an Amazon Associate, I earn from qualifying purchases.

For any kitchen-lover, the way on how to clean meat grinder plates is uncomplicated at all.

While everyone knows that maintenance or cleaning kitchen wares like the grinder is substantial, not everybody has the experience to be able to conduct this effortless task.

Let’s spend 5 minutes walking through this article to learn the proper guideline on keeping your grinder spotless clean. Are you ready?

A Little Preparation For Cleaning

Should we go ahead cleaning immediately?

No. It will be a bad idea to commence cleaning without hesitation since maybe there is a considerable amount of excess meat on the grinder plate. That’s why we had better remove them to assure no hassle for the cleaning process.

We have an astonishing tip for you! Use some pieces of bread.

Before disengaging the meat grinder parts for cleaning, put two pieces of bread inside the machine, and start grinding. Do you know why?

Well, by doing so, your bread pieces will be like sponges and they will soak up most of the excess meat that remains stuck inside the machine. After this procedure, we can start cleaning and the process will be straightforward.

Three Simple Steps On How To Clean Meat Grinder Plates?

Put it apart

The first thing you have to do is to remove the meat grinder plates from your grinder. For safety, make sure it is unplugged in before disassembling.

You will start with detaching the screws, then proceed with the cover, the blade, and finally the plate. Take it easy because the cutting edges are so sharp that any slight mistake can make you encounter unexpected accidents.

Wash and Clean the part by hand

“Can I use a dishwasher for cleaning the plates?”.

Yep, you can. However, the plate is metallic, so it is not wise at all to use the dishwasher that can wreck the metal plate.

Furthermore, it can reduce the sharpness of the plate holes or blades, which leads to the dwindled efficiency of your meat grinder.

To start cleaning, you should use light warm soapy water. Soak all the parts of the grinder for about 15 minutes so that the meat residue left on the surface will loosen, then we can easily remove them by washing.

In case you have an electric grinder, do not soak it under the water, which can cause the engine to become waterlogged and get damaged. Another solution is to rinse the faucet around the tube and hopper of the device while still striving to keep the motor dry.

After about 15 minutes, you can take the grinding plates as well as other accessories out of the water and start cleaning. You should use the sponge or soft brush to scrub them smoothly. After finishing, rinse them off with clean water.

Make it dry

After cleaning and rinsing all the parts, it is time to make them dry before using them. Don’t forget this step unless you will see some rust the next time you use the grinder due to the oxidation.

To dry correctly, you should use a soft towel. If you prefer air dry under the sun, remember to get it back in a few hours.

• Best Electric Heavy Duty Meat Grinder UK
• How To Use Electric Meat Grinder

Conclusion

To wrap up, above is the short step by step guide on how to clean meat grinder plates. Now it is time for you to go to the kitchen and give your grinder a new look!