Gas hobs are essential parts of a kitchen and a home in general. They’re the source of delicious meals and hot drinks no matter the weather, but the appliance can be quite complicated. Let us dive into this simple and easy guide on “How to connect gas hob?” to warm your family’s space and tummy!
Table of Contents
Prepare Your Tools
Before you start rolling up your sleeves, you might want to avoid frantically looking for things during the workflow. Note down these elements:
- A stainless steel fuel hose (we advise saving rubber ones for free-standing hobs).
- A gas connector of the adapter type.
- Petrol tape.
- A spanner, preferably an open-end one.
With all that in your toolbox, let’s get right into it now!
Guide on How to Connect Gas Hob in Great Detail?
Step 1: Close The Gas
You’ll first need to find where a fuel valve is in your kitchen. Once you’ve seen it, turn it 90-degree to seal off the gas line.
This step is to ensure safety in your kitchen before you let fuel into its proper place. If you want to be extra careful, you can also check for leaks on your fuel line by pouring soapy water onto it and waiting for bubbles.
Step 2: Put The Fuel Connector In Place
A fuel hose is not supposed to fit on your hob, so a fuel connector is in need. Besides, please consider the hob’s manufacturing manual for the correct parameter your hose and connector need to fit properly without damaging both sides.
The connector is incapable of preventing fuel leaks completely, so we’d advise you to wrap the tape around its base. When the tape is completely secured, you can safely put the spanner into action and tighten the connector.
Some might also make the mistake of over-tightening the fuel connector, as such execution can deform the tool and lower its longevity. Moreover, if the connector is in one place, it is safe to say that’s enough force on the thing already.
Step 3: Connect The Fuel Hose To The Hob
Depending on your gas hob, you’ll spot a rubber ring. If not, you might need to further check for leaks on the fuel hose and the hob itself and apply tape whenever necessary.
After safety is ensured, you can start grabbing your hose and spanner and attach the hose to its connector base.
Furthermore, please note that if there’s a rubber ring on the fuel hose already, leave the tape out of the equation as friction can occur and lead to small rips in the rubber and petrol leaks in the future.
Step 4: Turn The Fuel Hose On The Gas
The next step on “How to connect gas hob” is to connect the hose to the gas supply, in this case, a petrol tank.
A similar rule of thumb from before applies in this step: if there’s rubber on the petrol hose, connect it directly to the petrol tap. Meanwhile, the tape is required if it’s steel or any other material. Please make sure to wrap the tape clockwise with the petrol tap’s rotation to ensure safety and ease of use.
If you’re feeling uneasy with the current setup, you can add another layer of protective tape and tighten the hose with the spanner once more.
Step 5: Check For Leaks
Reuse the soapy water, then test it on the hose, the connector, and other tool intersections. If the result is bubbles, it means that there’s a leak and a recheck on securing steps is necessary. Additionally, if you have to redo any steps, please don’t forget to switch off the petrol line, or else your kitchen will be in danger.
That marks the end of our guide on how to connect gas hob. We hope you’ve followed the steps that we’ve carefully noted, and the hob will accompany your family for years to come. Do not forget to pull up this guide whenever you need to repeat the process.